| > | | | | right up. First of all, realize that might be one solution; |
| Many of us have scooter that have starting or | | | | but here is another unknown problem and solution we |
| stalling-out problems. For some of us, it’s the | | | | might not know that is happening at the same time: |
| whole fuse setup that is causing our problems, and | | | | We’ve replaced the fuse and the scooter |
| here are the top 3 solutions. | | | | starts up, so we think we solved the problem, when |
| Many of us have scooter that have starting or | | | | actually we didn’t. What we didn’t know |
| stalling-out problems. For some of us, it’s the | | | | is that the fuse that was already in there, was working |
| whole fuse setup that is causing our problems, and | | | | just fine. The new fuse worked because we |
| here are the top 3 solutions. | | | | worked with the fuse holder replacing the fuse, not |
| There is a small fuse box next to the battery on the | | | | realizing the problem was the fuse holder. By simply |
| main red battery cable. There is a fuse inside that | | | | playing with it, it made contact again and the scooter |
| white plastic housing. It also has an extra replacement | | | | started. Sometimes these plastic cases melt and can |
| fuse in most of these scooters. This is one of the least | | | | cause a short. |
| expensive gas scooter parts. | | | | The fuse box connectors in these scooters are very |
| When our scooters don’t start or start to stall | | | | cheap. I recommend replacing the holder unit with a |
| on us, we check the fuse first in our repair shop; so I | | | | more heavy duty unit if you suspect anything, including |
| suggest everyone try that step as well. I have had a | | | | the connectors. This is a very faulty gas scooter part |
| few cases that the fuse looks fine, but we replaced it | | | | and is easily replaced with a higher quality unit we can |
| anyways with the extra fuse, and the scooter started | | | | count on to work and not short out. |